| Author | Message | ||
     Mike Bergmann Unregistered guest Rating: N/A |
Shooting Star had the original posts set in cast aluminum "sockets" bolted into the cabin sole (identical to the sockets on the underside of the table.) these cracked over time. I found comparable replacements at Post Marine in New Rochelle, NY and bolted them into the sole. No problems since, but you do have to apply some kind of lubricant to the crimped and tapered ends of the two "posts", or they will jam in place. | ||
| ralph mercer New member Username: Fastlenz Post Number: 2 Registered: 06-2004 Rating: N/A |
My recently purchased 9.1 is missing a tubular bracket that attaches the cabin dining table to the floor. the other bracket is corroded and not usable. Should I look for stock replacements or do I have to fabricate new ones? | ||
| ralph mercer New member Username: Fastlenz Post Number: 1 Registered: 06-2004 Rating: N/A |
I am interested in tackling a pull out berth project and would like to have some info, tips, plans? | ||
| Jerry Salaja New member Username: Jerry Post Number: 6 Registered: 02-2001 Rating: N/A |
Can someone who has the optional pull out berth give me the measurements for the legs and size of the tubing. I lost the ones that I took and would like to finish this project. |
